KnowledgeBase Glossary    Contact Us
Browse by Category KnowledgeBase .: New Setup Issues .: Do you set any per connection data transfer limits?

Do you set any per connection data transfer limits?

We have a 12Mbs (12 million bits per second) per hardware node limit and a 30Mbs network limit; we do not have a per-connection limit. If you are experiencing lower rates than this, it is due to network devices/connections between our network and your location. (By way of comparison, a typical cable Internet connection is approximately 3Mbps.)

If you need more burstable bandwidth than 12Mbit minus the other traffic on the hardware node you would need either a dedicated or colocated server. We are able to set the server limits to 30Mbit and also raise the network limit for individual dedicated/colocated servers.

How helpful was this article to you?

Related Articles

article When does my bandwidth counter reset?
Typically the monthly data transfer is reset...

  1-19-2006    Views: 6170   
article How do I configure resource limits for a domain on a OHP or WebPro hosting account?
In your control panel follow these steps:For...

(No rating)  3-28-2006    Views: 11190   
article How do I transfer a domain name hosted by another server to my current account?
If you wish to host your domain with us but...

(No rating)  11-11-2005    Views: 10060   

User Comments

No comments have been posted.

.: Powered by Lore 1.5.4
Copyright 2005-2014 Advantagecom Networks, Inc. - Xen Linux Virtual Private Servers (VPS) - Paypal Accepted